Model 5550 E coffin trolley with electric drive

The coffin trolley model "5550 E" has an electric motor that allows you to drive through cemeteries with long, steep or difficult paths without any problems.

The coffin is transported to the grave without any effort.

Construction:

2 continuous stainless steel handle bars, additional handle for operating the coffin trolley, roller carriage with hard rubber wheels and brakes. Shelves covered with grooved rubber and cloth holder.

Sturdy steel construction, four pneumatic wheels, rear Ø 280 x 100 mm, front swivel castors Ø 260 x 85 mm, waterproof lacquered screen printing plate.

Electrical systems and controls:

The motor is located on the underside of the coffin trolley and is concealed and protected by the curtain.

There is a red toggle switch on the motor; as soon as this is flipped, the battery charge indicator lights up and the trolley is ready to move.

This indicator is also covered by the curtain and is located near the operating handle.

You can choose between driving forwards or backwards, for which there is a drive lever under the guide handle.

the guide handle. Pulling it up moves the trolley forwards and pushing it down moves it backwards.

With the small rocker lever under the drive lever, you can choose between slow or fast driving.

The trolley also has an emergency switch on the handle; as soon as this is pressed, the motor switches off immediately and locks the rear wheels.

This prevents the trolley from rolling away uncontrollably. The motor brake also serves as a parking brake.

In addition, the operating handle can be folded down completely and is therefore no longer visible.

Charging the battery:

The charger (230V) is included in the scope of delivery. The socket for the charging cable is located in the area of the operating handle and is concealed by the curtain.

The coffin trolley has a battery level indicator, which is located near the operating handle.

Technical data:

Batteries: 45 Ah

Battery capacity: up to 1.5 hours

Battery charging time: approx. 8 - 10 hours

Slope capacity: 30 %

Version:

The electric version is also available for our model "5550" with folding guide bars

or for our model "5555" with 6 fixed or folding handles.